Sun Microsystems 3900 Series, 6900 Series manual Troubleshooting Host Devices

TABLE 5-1lists all the host events in the Storage Automated Diagnostic Environment.

TABLE 5-1Storage Automated Diagnostic Environment Event Grid for the Host

Category	Component	EventType	Sev	Action	Description	Information
host	hba	Alarm+	Yellow		[ Info ] status of hba	Monitors changes in
					/devices/	the output of the
					sbus@9,0/	luxadm -e port.
					SUNW,qlc@0,30000
					/fp@0,0:devctl
					on
					diag.xxxxx.xxx.com
					changed from NOT
					CONNECTED to
					CONNECTED
host	hba	Alarm-	Red	Y	[ Info ] status of hba	• Monitors changes
					/devices/	in the output of the
					sbus@9,0/	luxadm -e port.
					SUNW,qlc@0,30000	• Found path to 20
					/fp@0,0:devctl	HBA ports.
					on
					diag.xxxxx.xxx.com
					changed from
					CONNECTED to
					NOT CONNECTED
host	lun.t300	Alarm-	Red	Y	[ Info ] The state of	luxadm display
					lun.T300.c14t500	reported a change in
					20F2300003EE5d0s	the port status of
					2.statusA on	one of its paths. The
					diag.xxxxx.xxx.com	Storage Automated
					changed from OK to	Diagnostic
					ERROR	Environment then
					(target=t3:diag244-	tries to find to
					t3b0/90.0.0.40)	which enclosure this
						path corresponds by
						reviewing its
						database of Sun
						StorEdge T3+ arrays
						and virtualization
						engines.

Chapter 5 Troubleshooting Host Devices 55

For Internal Use Only