Sun Microsystems 3900 Series, 6900 Series manual Table A-2 SRN/SNMP Single Point of Failure Table

A P P E N D I X A

Virtualization Engine References

This Appendix contains the following Tables:

■Table A-1“SRN and SNMP Reference”

■Table A-2 “SRN/SNMP Single Point of Failure Table”

■Table A-3 “Port Communication”

■Table A-4 “Service Codes”

TABLE A-1provides an explanation of Service Request Numbers for the virtualization engine.

TABLE A-1SRN and SNMP Reference

SRN	Description	Corrective Action
1xxxx	Disk drive Check Condition status. xxxx is	If too many Check Conditions are returned,
	the Unit Error Code.	then check the link status.
	The Unit Error Codes are returned by the
	drive in Sense Data bytes 20-21 in response
	to the SCSI Request Sense command.
70000	SAN Configuration has changed.
70001	Rebuild process has started.
70002	Rebuild is completed without error.
70003	Rebuild is aborted with a read error. This	If a spare drive is available, it will be
	means that the drive copying information	brought in and used to replace the failed
	cannot read from the primary drive.	drive. If no spare is available, replace the
		failed drive with a new drive.
70004	Write error is reported by follower. If the	If a spare drive is available, it will be
	initiator is master, then its follower has	brought in and used to replace the failed
	detected a write error on a member within	drive. If no spare is available, replace the
	a mirror drive.	failed drive with a new drive.

125

For Internal Use Only