Sun Microsystems 3900 Series, 6900 Series manual LUN has changed

Category	Component	EventType	Sev	Action	Description	Information
t3	volume	StateChange-	Red	Y	[ Info/Action ]	Information: The Sun
						StorEdge T3+ array
						has reported that a
						power cooling unit
						has been disabled.
						Recommended action:
						1.	Check the Sun
							StorEdge T3+ array
							syslog for battery
							hold times.
						2.	If < 6 minutes,
							replace the battery,
							or the entire PCU,
							as required.
t3	power	StateChange-	Red	Y	[ Info/Action ]	Information: The Sun
					power.u1pcu2(TECT	StorEdge T3+ array
					ROL-CAN.300-	has reported that a
					1454-	LUN has changed
					01(50).008275) in	state.
					T3 rasd2-t3b1
					(ip=xxx.0.0.41) is	Recommended action:
					now Not-Available	1.	Telnet to the
					(status-state changed		affected Sun
					from ready-enabled to		StorEdge T3+ array
					ready-disable).	2. Check the status of
							LUNs via vol
							mode or vol
							stat.
t3	enclosure	Statistics			Statistics about T3
					d2-t3b1
					(ip=xxx.0.0.41)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 121

For Internal Use Only