switchtest(1M)
switchtest(1M) is used to diagnose the Sun StorEdge network FC
switchtest runs the port diagnostic on connected switch ports. While switchtest is running, the port statistics are monitored for errors, and the chassis status is checked.
CODE EXAMPLE
#/opt/SUNWstade/Diags/bin/switchtest -v -o "dev=
2:192.168.0.30:0x0xfersize=200"
"switchtest: called with options: dev=2:192.168.0.30:0x0xfersize=200"
"switchtest: Started."
"Testing port: 2"
"Using ip_addr: 192.168.0.30, fcaddr: 0x0 to access this port."
"Chassis Status for Device: Switch Power: OK Temp: OK 23.0c Fan 1: OK Fan
2: OK" |
|
|
"Testing | Device: Switch Port: 2 Pattern: 0x7e7e7e7e" | |
"Testing | Device: Switch Port: 2 Pattern: 0x1e1e1e1e" | |
"Testing | Device: Switch Port: 2 Pattern: 0xf1f1f1f1" | |
"Testing | Device: Switch Port: 2 Pattern: 0xb5b5b5b5" | |
"Testing | Device: Switch Port: 2 Pattern: 0x4a4a4a4a" | |
"Testing | Device: Switch Port: 2 Pattern: 0x78787878" | |
"Testing | Device: Switch Port: 2 Pattern: 0xe7e7e7e7" | |
"Testing | Device: Switch Port: 2 Pattern: 0xaa55aa55" | |
"Testing | Device: Switch Port: 2 | Pattern: 0x7f7f7f7f" |
"Testing | Device: Switch Port: 2 | Pattern: 0x0f0f0f0f" |
"Testing | Device: Switch Port: 2 | Pattern: 0x00ff00ff" |
"Testing | Device: Switch Port: 2 | Pattern: 0x25252525" |
"Port: 2 | passed all tests on Switch" | |
"switchtest: Stopped successfully."
All Storage Automated Diagnostic Environment diagnostics tests are located in /opt/SUNWstade/Diags/bin. Refer to the Storage Automated Diagnostic Environment User’s Guide for a complete list of tests, subtests, options, and restrictions.
20 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002
