7.Choose Maintenance -> General Maintenance -> Maintain Hosts.
Refer to Chapter 3, “Maintenance,” of the Storage Automated Diagnostic User’s Guide for detailed instructions.
8.In the Maintain Hosts window, select the new host.
9.Configure the options as needed.
10.Choose Maintenance
a.In the Topology Snapshot window, select the new host.
b.Click Create and Retrieve Selected Topologies.
c.Click Merge and Push Master Topology.
Conclusion
Any time a master, alternate master, or slave monitoring host is replaced, you must recover the configuration using the procedures described above. This is especially important when the Storage Service Processor is replaced as a FRU, whether the Storage Service Processor is the master or the slave.
Chapter 5 Troubleshooting Host Devices 59
For Internal Use Only
