Sun Microsystems 3900 Series, 6900 Series manual If the switch in question does not

TABLE B-2Sun StorEdge Network FC Switch-8 and Switch-16 Switch SUNWsecfg Error Messages

Message	Description and Cause of Error		Suggested Action
Common Switch	Sun StorEdge system type entered,		Either call the command with the
	${cab_type}, does not match system		-f force option to force the series
	type discovered, ${boxtype}.		type, or do not specify the cabinet type
			(no -coption).
Common Switch	1.	Unable to obtain lock on switch	1. Another switch command might be
		${switch}. Another command is	updating the configuration. Check
		running.	listavailable -s.
			2. If the switch in question does not
			appear, check for the existence of
			the lock file directly by typing ls
			-la /opt/SUNWsecfg/etc (look
			for .$switch.lock).
			3. If the lock is set in error, use the
			removelocks -s command to
			clear it.
checkswitch	1.	Current configuration on $switch	1. Select View Logs or directly view
		does not match the defined	$LOGFILE for more details.
		configuration.
			2. Re-run setupswitch on the
	2.	One of the predefined static switch	specified $switch.
		configuration parameters, that can
		be overridden for special
		configurations such as NT connect
		or cascaded switches, is set
		incorrectly.
listavailable	No Sun StorEdge network FC switch-8		If no other commands are running and
	or switch-16 switch devices are		you believe the configuration lock
	available. They are either not found, or		might be set in error, run the
	the configuration lock is set.		removelocks command.
	Either the components (the Sun
	StorEdge T3+ array, the switch, or the
	virtualization engine) are down
	(cannot be pinged) or another
	SUNWsecfg command is running and
	is updating the configuration (ps -ef)

Appendix B SUNWsecfg Error Messages 135