Sun Microsystems 6900 Series, 3900 Series Table A-2SRN/SNMP Single Point of Failure Table, 70051

TABLE A-1SRN and SNMP Reference

SRN	Description	Corrective Action
72005	Failed to check for SAN changes.
72006	Failed to read SAN event log.
72007	SLIC daemon connection is down.	Wait for 1-5 minutes for backup daemon to
		come up. If it doesn’t, check the network
		connection for virtualization engine halt, or
		hardware failure.

TABLE A-2SRN/SNMP Single Point of Failure Table

			SRN after
			Corrective
SRN	SNMP Description	Corrective Action	Action
70020	• SAN topology has changed	Check SAN cabling and connections	70020
70030	• Global SAN configuration has	between Sun StorEdge T3+ array	70030
70050*	changed.	and virtualization engine.	70051**
70021	• SAN configuration has changed.	Perform Sun StorEdge T3+ array
	• A physical device is missing.	failback, if necessary.
70025	Partner’s virtualization engine’s IP is not	Check Ethernet cabling and	None.
	reachable.	connections.
70020	• SAN topology has changed	• Check cabling and connections	70020
70030	• Global SAN configuration has	between virtualization engine.	70030
70050	changed.	• Cycle power on failed	70050
70025	• SAN configuration has changed.	virtualization engine, if fault LED	70024
70021	• Partner virtualization engine’s IP is	flashes.	70021
70022	not reachable.	• Perform Sun StorEdge T3+	70022
	• A physical device is missing.	array failback, if necessary.
	• A SLIC virtualization engine is	• Enable VERITAS path.
Readings	missing.
72007	When error halt on virtualization
	engine (not master)
	• SLIC daemon connection is inactive.
72000	Failed to check for SAN changes,
	daemon error, check the SLIC
	virtualization engine.
	• Secondary daemon connection is
	active.
* Sun StorEdge T3+ array LUN Failover.
** Sun StorEdge T3+ array LUN Failback.

128 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002