American Dynamics ADCTDN0230P, ADCTDN2412N, ADCTDN2412P manual TITLE/VIDEO screen

ADCTDN2412N_P_EN.book Page 37 Friday, September 28, 2007 12:49 PM

Item			Functions and settings
INPUT	This sets the polarity of the AUX input signal.
POLARITY	MAKE		: When the contact between all alarm input
			terminals and GND terminals changes from
			open to close, the alarm will activate.
	BREAK		: When the contact between all alarm input
			terminals and GND terminals changes from
			close to open, the alarm will activate.
	[Default setting: MAKE]
		Memo:
		● When AUX MODE item is set to AB&W OUTB, A- - -B
		will be displayed and settings is disabled.

TITLE/VIDEO screen

	Item			Functions and settings
CAMERA		This item sets the title to be displayed permanently on
TITLE EDIT		the lower part of screen. A maximum of 24 characters
		can be set for the title.
		ACamera title settingB (A Pg. 48)
W.BALANCE		Select ATW or ATW wide for auto tracking white balance
		that respond to scene lighting changes. Select AWC
		when white balance is fixed and does not respond to
		scene lighting changes.
			Memo:
			● In B&W mode, A- - -Bwill be displayed and settings is
			disabled.
		[Default: ATW]
	ATW	This is the Auto-Tracking White Balance mode.
		(Automatic color temperature tracking.) The camera
		adjusts the white balance automatically according to the
		color temperature of the illumination.
	ATW(WI	This mode supports an even wider range of color
	DE)	temperature than ATW. Use this mode when white
		balance cannot be achieved using ATW mode.

37