Quick SET UP and Operation

Synching Up The Transmitter and Base

1)Turn the transmitter power switch to on and place the transmitter in the recharge cradle of the base. The transmitter goes in the base with the beltclip facing out.

2)The recharge LED will light (Green if fully charged, Red if charging) and the In-Use Green LED on the base and transmitter will flash 3 times.

3)The transmitter and base are now synched and will continue to be until another transmitter is linked to that base or the base is powered down.

Normal Operation

4)With the transmitter synched up, remove it from the cradle, plug in the lapel microphone (if used) and place the transmitter on your belt.

5)To start the recording, press the In-Use button and the In-Use LED will light a constant green and you will hear a short beep

6)To end recording, press the In-Use button and the In-Use LED will turn off and you will hear a short beep.

7)At the end of your shift turn the transmitter off and replace it in the charging cradle.

Out of Range

8)If you use the Transmitter too far away from the Receiver during recording, the transmitter will alert you with Audible warning beeps (two tone) and the In-Use LED will blink in red.

9)Move closer to the receiver base and the link will be re-established once you return to normal range. The In-Use LED will light constant green when link is back to normal operation.

10)If the link is not re-established within 30 seconds, the transmitter and receiver will return to standby mode.

11)If you went out of range in Standby mode, or the unit reverted to standby mode, re-enter normal range and press the In-Use button. Operation will return to normal.

12)If you will be out of range for a long period of time, turn the bodypack off.

Low Battery Warning

13)If the transmitter Low BATT indicator (red) starts flashing or you hear warning beeps, return the transmitter to its cradle on the receiver to fully charge the transmitter.

14)The Charge LED indicator will light constant green when the unit is fully charged.

EMG Panic Button (if wired for use in your vehicle)

15)The EMG or Panic Button can be programmed to do many things but may not be connected in your vehicle. Check with your technical department to understand what this button will control before you use it.

16)In Record mode: Press the EMG button on the transmitter, a beep will sound and the relay will be triggered at the receiver.

17)In Standby mode: Press the EMG button on the transmitter, a beep will sound, the green In-Use indicator will blink and the relay will be triggered at the receiver.

Auto Talk (if video recording equipment supports)

18)The Auto Talk feature is used to turn on the microphone whenever the video recorder is turned on. Some video record units can be triggered by other events (lights and siren being turned on etc.) and Auto Talk ensures the

Revision B

Page 3 of 8

10/11/06

PW24-2 specifications

The Telex PW24-2 is a high-performance portable wireless PA system that has gained popularity among event organizers, educators, and performers for its impressive sound quality, portability, and user-friendly features. Designed to provide clear audio in various environments, the PW24-2 is perfect for both indoor and outdoor use.

One of the key features of the PW24-2 is its robust amplification capability, delivering exceptional sound coverage and clarity. The system is equipped with a powerful built-in amplifier that ensures consistent audio output, making it suitable for audiences of different sizes. The sound reproduction is balanced and natural, thanks to the high-quality speakers that are a hallmark of Telex products.

The PW24-2 utilizes advanced wireless technology, allowing for seamless connectivity with various microphones and audio sources. The unit is compatible with a range of wireless microphones, providing flexibility for users who might prefer handheld, lapel, or headset microphones. This versatility makes it ideal for diverse applications, from public speaking engagements to live performances, where speaker mobility is essential.

Additionally, the Telex PW24-2 offers multiple input options, including Bluetooth connectivity, allowing users to stream audio directly from smartphones, tablets, or other devices. The integration of Bluetooth technology enables quick and easy pairing, eliminating the hassles of tangled wires and providing freedom of movement during presentations or performances.

The system is designed with user-friendliness in mind. The intuitive control panel features straightforward knobs and buttons for adjusting volume levels, tone controls, and input selection. This simplicity ensures that users can set up and operate the PW24-2 without extensive technical knowledge.

Portability is another strong point of the Telex PW24-2. The compact design and lightweight construction make it easy to transport, whether moving from room to room or traveling to outdoor events. The built-in handle adds to the convenience, enabling quick and easy relocation.

Powering the PW24-2 is a long-lasting rechargeable battery that ensures extended use without the need for external power sources. This capability is particularly beneficial for outdoor events or remote locations where access to electrical outlets may be limited.

In summary, the Telex PW24-2 is an exceptional portable wireless PA system that combines powerful audio performance, versatile connectivity, and ease of use. Its robust design, advanced technology, and portability make it an excellent choice for anyone needing a reliable sound solution for various applications. Whether for educational purposes, events, or performances, the PW24-2 exemplifies technology and innovation in portable audio solutions.