Belkin P75465-A Setting Up your Network USB Hub, Preparing for Setup, Installing the Software

1

2

3

4

5

Setting Up your Network USB Hub

The Hub works with Windows® XP and Windows VistaTM

(32- and 64-bit), and Mac OS® X (v10.3~v10.4). In order to use the Hub, you must have a networking router connecting your network.

1. Preparing for Setup

NOTE: If you are connected to a network router that uses Dynamic Host Configuration Protocol (DHCP), which most networks do, you do not need to set up your Hub.

1.1Plug the AC adapter into the Hub.

1.2Check the Power LED (green). It should be illuminated.

1.3Plug the Ethernet cable into the Hub.

1.4Plug the other side of the Ethernet cable into your network router.

2. Installing the Software

Important: If you do not install the software on your computer, the Hub will not work.

2.1Insert the setup CD into your CD-ROM drive. You will see the Hub Setup CD icon.

Please open it and click “Setup” icon.

2