1
2
3
4
5
Using the Network USB Hub Control Center
What the designations mean
Device: Name of the device. You can change the name by clicking “Properties”.
Status: Status of the device. The status changes automatically.
Type: Category of the device. This is detected automatically.
Automatically connect: This allows the PC to automatically connect to this device. This can be enabled or disabled
in “Properties”.
Hub ID: The ID of the Hub into which the device is plugged. This is detected automatically.
Connected to this computer: Devices shown are currently connected to the computer that you are using.
Not Connected: It is available for you to use. You can connect to this device by
6
