Paradyne FrameSaver DSL, 9783 manual Easy Install Configuration Options 2, TS Access VCI

Page 45

Configuration Options

Table 4-1. Easy Install Configuration Options (2 of 2)

TS Access (VCI)

Possible Settings: 32±255

Default Setting: 0

Specifies the VCI on the network interface to be used for troubleshooting by the service provider. VPI 0, VCI 35 is the default management path between the FrameSaver DSL unit and the Hotwire GranDSLAM.

32 ± 255 ± Specifies the VCI.

Create a Dedicated Network Management Link

With the cursor on the Create a Dedicated Network Management Link field, press Enter. When prompted, enter a DLCI for the link from 16 to 1007. The management link DLCI is added or modified.

Ethernet Port Options Screen

With the cursor on the Ethernet Port Options Screen field, press Enter. The Ethernet Port Options screen appears. See Configuring the Ethernet Port on page 4-40.

After configuring the Ethernet port configuration options, save your changes. Then press the Esc key to return to the Easy Install screen.

Network 1 DSL Line Rate (Kbps)

Possible Settings: AutoRate, 144, 192, 272, 384, 400, 528, 768, 1168, 1552, 2320

Default Setting: AutoRate

Determines whether the rate on the DSL interface is automatically detected using the Conexant AutoBaud algorithm, or set to a specific value.

144 ± 2320 ± The DSL line rate is set to the specified value.

AutoRate ± The DSL line rate is automatically detected from the DSL interface.

9783-A2-GB20-00

July 2000

4-5

Image 45

Contents FrameSaver DSL Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Options Operation and Maintenance Troubleshooting Setting Up Network Health for FrameSaver Devices Index About This Guide Purpose and Intended AudienceDocument Organization Alarm, and other information, as well as troubleshooting Troubleshooting. Provides device problem resolutionTest procedures Setting Up OpenLane for FrameSaver Devices. IdentifiesProduct-Related Documents Conventions Used When viewing this manual online. Click onTo indicate a hyperlink to additional information Highlighted textAbout the FrameSaver DSL Unit System OverviewSystem Overview Features FrameSaver DSL Features and Benefits9783-A2-GB20-00 July Benefits Frame Relay DSL ATMFrameSaver DSL Feature Sets Basic Advanced Feature Feature SetBasic Features Maximum Number of PVCs and Management PVCs Supported Advanced SLV Features OpenLane SLM System About the FrameSaver DSL Unit User Interface Basic Operation Logging On ProcedureIf your login was Then Select Main MenuScreen Work Areas Screen Format DescriptionThis is a remote-site unit that supports 8 PVCs and has Navigating the Screens Keyboard KeysPress Select For the screen Press Enter to Function Function KeysSelecting from a Menu Switching Between Screen AreasSelecting a Field Entering InformationExample User Interface and Basic Operation Configuration Procedures Configuration Menu Basic ConfigurationConfiguration Option Area Description Configuration Option AreasMain Menu → Configuration Accessing and Displaying Configuration OptionsConfiguration → PVC Connections Changing Configuration OptionsSaving Configuration Options Overview Configuration OptionsConfiguration Options Using the Easy Install Feature Main Menu → Easy InstallEasy Install Screen Example Easy Install Configuration Options 1 TS Access DlciTS Access VPI TS Access VCI Easy Install Configuration Options 2Create a Dedicated Network Management Link Ethernet Port Options ScreenEntering System Information Setting the System Clock Setting Up So the Router Can Receive RIPConfiguration → Data Ports → Dlci Records Main Menu → Control → System InformationConfiguring the Overall System Configuration Option TablesMain Menu → Configuration → System → Frame Relay and LMI Configuring Frame Relay and LMI for the SystemSystem Frame Relay and LMI Options 1 LMI BehaviorLMI Status Enquiry N1 Possible Settings 1, 2, 3, 4 LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25System Frame Relay and LMI Options 2 Service Level Verification Options 1 Configuring Service Level Verification OptionsService Level Verification Options 2 SLV Timeout Clearing Event ThresholdSLV Packet Size bytes Main Menu → Configuration → System→ General Configuring General System OptionsTest Timeout General System OptionsConfiguring the Network Interface Configuring the Physical InterfacesMain Menu → Configuration → Network → Physical Network Physical Interface OptionsMain Menu → Configuration → Data Ports → Physical Configuring the User Data PortData Port Physical Interface Options 1 Transmit Clock SourceData Port Physical Interface Options 2 Monitor DTRPort DTE Initiated Loopbacks Main Menu → Configuration → Data Ports → Frame Relay Configuring Frame Relay for the Data PortData Port Frame Relay Options 1 LMI ParametersData Port Frame Relay Options 2 Main Menu → Configuration → Network → ATM Configuring ATM for the Network InterfaceCell Delineation Error Event Threshold Network ATM OptionsDlci Record Options 1 Configuring Circuit and Dlci RecordsDlci Number VPI,VCI Number VPIDlci Record Options 2 Dlci Type Possible Settings Standard, MultiplexedCIR bps Committed Burst Size Bc BitsExcess Burst Size Bits Dlci Record Options 3Dlci Priority Outbound Management PriorityConfiguring PVC Connections Main Menu → Configuration → PVC Connections10. PVC Connection Options 1 Destination Link 10. PVC Connection Options 2Destination Dlci Destination EdlciConfiguring Node IP Information Setting Up Management and Communication Options11. Node IP Options 1 11. Node IP Options 2 11. Node IP Options 3 TS Access Management LinkConfiguring Management PVCs 12. Management PVC Options 1Name Primary Link Possible Settings Net1-FR1, Port-1, Clear 12. Management PVC Options 2Set DE 12. Management PVC Options 3 Primary DlciPrimary Edlci Name 1 Access Configuring General Snmp Management13. General Snmp Management Options 1 Snmp Management13. General Snmp Management Options 2 Name 2 AccessTelnet Login Required Configuring Telnet and/or FTP Session Support14. Telnet and FTP Session Options 1 Telnet SessionInactivity Timeout 14. Telnet and FTP Session Options 2Disconnect Time Minutes 14. Telnet and FTP Session Options 3 FTP Login RequiredFTP Session FTP Max Transfer Rate KbpsAccess Type Configuring Snmp NMS Security15. Snmp NMS Security Options NMS IP Validation16. Snmp Traps Options 1 Configuring Snmp TrapsSnmp Traps Number of Trap ManagersEnterprise Specific Traps 16. Snmp Traps Options 216. Snmp Traps Options 3 Link Traps Possible Settings Disable, Up, Down, BothLink Traps Interfaces Rmon TrapsConfiguring the Ethernet Port 17. Ethernet Port Options 1Interface Status Proxy ARP 17. Ethernet Port Options 218. Communication Port Options 1 Configuring the Communication PortPort Use Character Length18. Communication Port Options 2 Login RequiredStop Bits Ignore Control Leads18. Communication Port Options 3 RIP 18. Communication Port Options 4External Modem Commands Configuring the COM Port to Support an External ModemDial-In Access 19. External Modem COM Port OptionsSecurity and Logins Controlling Asynchronous Terminal Access Limiting AccessSet the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device AccessLimiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp AccessAssigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Creating a Login Main Menu → Control → Administer LoginsField Enter Deleting a Login Modifying a LoginOperation and Maintenance Displaying System Information Main Menu → Status → IdentityView this field To find Viewing LEDs and Control Leads Main Menu → Status → Display LEDs and Control LeadsDisplay LEDs & Control Leads Screen General Status LEDs 1 Label Indication Color What It Means LED DescriptionsUser Data Port LED Label Indication Color What It Means Network Interface LEDs Label Indication Color What It MeansAdditional Control Leads Label Indication What It Means Control Lead DescriptionsNetwork Interface User Data PortDevice Messages 1 What It Indicates What To Do Device MessagesSee Changing Software Device Messages 2 What It Indicates What To DoDevice Messages 3 What It Indicates What To Do See Upgrading System Device Messages 4 What It Indicates What To DoDevice Messages 5 What It Indicates What To Do Reset COM PortStatus Menu Status InformationSelf-Test Results Messages Last System Reset Date and Time Last System Reset Date and TimeSystem and Test Status Messages Self-Test Results MessagesHealth and Status Messages 1 What It Indicates Health and Status MessagesFrame relay link Health and Status Messages 2 What It IndicatesFrame relay link 1, 2 Health and Status Messages 3 What It IndicatesTest Status Messages 1 What It Indicates Test Status MessagesSend Pttn Active, Interface Test Status Messages 2 What It IndicatesMain Menu → Status → PVC Connection Status PVC Connection StatusPVC Connection Status Screen Example PVC Connection Status 1 FieldPVC Connection Status 2 Field What It Indicates Main Menu → Status → Network Interface Status Network Interface StatusNetwork Interface Status Screen Example 10. Network Interface Status Field What It IndicatesIP Routing Table Main Menu → Status → IP Routing TableIP Routing Table Screen Example 11. IP Routing Table Values Column What It Indicates Performance Statistics Main Menu → Status → Performance StatisticsPerformance Statistics Menu Performance Statistics → Clear All Statistics Clearing Performance StatisticsPerformance Statistics → Frame Relay Performance Statistics → ESF LineService Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Dlci Performance Statistics Main Menu → Status → Performance Statistics → Dlci13. Dlci Performance Statistics 1 What It Indicates CIR&EIR 13. Dlci Performance Statistics 2 What It IndicatesFrame Relay Performance Statistics Frame Relay ErrorsMain Menu → Status → Performance Statistics → Frame Relay 14. Frame Relay Performance Statistics 1 What It IndicatesFrame Relay Hdlc Errors Frame Relay Errors contd14. Frame Relay Performance Statistics 2 What It Indicates Frame Relay LMIMain Menu → Status → Performance Statistics → ATM ATM Performance Statistics15. ATM Performance Statistics 1 What It Indicates TC Sublayer15. ATM Performance Statistics 2 What It Indicates Ethernet Performance Statistics Main Menu → Status → Performance Statistics → EthernetStatistic What It Indicates Trap Event Log Main Menu → Status → Trap Event LogTrap Event Log Screen Example Operation and Maintenance FTP Operation FTP File Transfers Dir directory Command DefinitionIf the message displayed is Then Upgrading System SoftwareChanging Software Determining Whether a Download Is CompletedIf retrieving Then Transferring Collected DataTroubleshooting Indicators See Problem IndicatorsResetting the Unit and Restoring Communication Resetting the Unit from the Control MenuResetting the Unit By Cycling the Power If selecting Following occurs Restoring Communication with an Improperly Configured UnitTroubleshooting Management Link Feature LMI Packet Capture Utility FeatureMain Menu → Control → LMI Packet Capture Utility LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace LogAlarm Conditions 1 What It Indicates What To Do AlarmsAlarm Conditions 2 What It Indicates What To Do Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems Troubleshooting TablesSee Trap Event Log in , Operation and Maintenance Device Problems 1 Symptom Possible Cause SolutionsUnit Device Problems 2 Symptom Possible Cause SolutionsATM Problems Symptom Possible Cause Solutions ATM ProblemsFrame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC ProblemsTest Menu Example Tests AvailableTest Timeout Feature When the status of a test is Only command available isStarting and Stopping a Test Active Aborting All TestsPVC Tests Screen Example PVC TestsSend Pattern PVC LoopbackMain Menu → Test → Network PVC Tests Main Menu → Test → Data Port PVC TestsConnectivity Monitor PatternMain Menu → Test → Data Port Physical Tests DTE LoopbackMain Menu → Test → IP Ping IP Ping TestProcedure Main Menu → Test → Lamp Test Lamp TestSetting Up OpenLane for FrameSaver Devices OpenLane Support of FrameSaver DevicesOpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver and SLV Support Setting Up OpenLane for FrameSaver Devices 10-1 Setting Up Network Health for FrameSaver DevicesInstallation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports About Service Level Reports Generating Reports for a GroupAbout At-a-Glance Reports Reports Applicable to FrameSaver SLV Devices About Trend ReportsPrinted Reports 10-8 10-9 10-10 Menus Menu HierarchyStatus Menu Hierarchy Frame Relay ModeControl Easy InstallMenu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB SupportSystem Group mib-2 FrameSaver Units sysDescr systemFrameSaver Units sysObjectID system Paradyne Indexes to the Interface Table ifTable Interfaces Group mib-2Physical Layer Frame Relay Logical LayerRmon Logical Layer NetScout Indexes to the Interface Table ifTableExamples Standards Compliance for Snmp TrapsTrap warmStart Trap authenticationFailureTable B-3. warmStart Trap What It Indicates Possible Cause Variable-BindingTraps linkUp and linkDown Sample strings Physical SublayerInterface Variable-Bindings Possible Cause Table B-6. linkUp and linkDown Variable-Bindings 2ATM Logical Link Sublayer DevHealthAndStatus Traps enterprise-SpecificSLVs devFrExt.mib Placeholder Traps RMON-Specific Event Defaults Rmon Alarm and Event DefaultsEventIndex EventDescription EventType Rising Event OperationPhysical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults MIB FR DTE MIB Dlci Alarm Defaults ± Paradyne AreaFrames Sent Snmp MIBs and Traps, and Rmon Alarm Defaults Object ID Cross-References Numeric Order 6.1.2.1.2.2.1 6.1.2.1.2.10.32.2.16.1.4.1.1795.2.24.2 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.46.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.16.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin AssignmentsDSL Network Interface Cable Figure C-1. DSL Network Interface Cable with RJ48C ConnectorSignal Direction Pin # COM Port ConnectorPin Standard EIA-232-D Crossover CableAT Command String To configure the modem to Data Port Connector Standard V.35 Straight-through CableDirection Pin Socket Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications DSL Network Interface COM PortEthernet Port Data PortFrameSaver SLV Upgrade Model / Feature NumberEquipment List EquipmentDescription Part Number Feature Number Description Model / Feature NumberOptional Features CablesNumbers IndexIN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9

Related manuals

Manual 166 pages 36.17 Kb

Manual 28 pages 41.96 Kb