Paradyne 9783 Dlci Performance Statistics, Main Menu → Status → Performance Statistics → Dlci

Operation and Maintenance

The statistics collected by the unit depend upon the device at the far end of the connection. If the far-end device is a FrameSaver SLV unit, frame relay, latency, and FDR/DDR (Frame Relay Delivery Ratio/Data Delivery Ratio) performance statistics are collected. If the far-end device is a non-FrameSaver device, or a FrameSaver 9120 or 9620, only frame relay statistics are collected.

DLCI Performance Statistics

These statistics appear when DLCI is selected from the Performance Statistics menu.

Main Menu → Status → Performance Statistics → DLCI

This screen only appears when Service Type is set to Frame Relay.

Table 6-13. DLCI Performance Statistics (1 of 2)

Statistic

What It Indicates

DLCI Up Since *	Date and time that the DLCI was last declared Active after a
	period of inactivity. Down is displayed if the DLCI is inactive.
	If the DLCI was Down, this is the time that the DLCI recovered.
	If the DLCI was never Down, this is the first time the unit
	discovered that the DLCI was active in the network.
DLCI Up Time *	Days, hours, minutes, and seconds since the DLCI was last
	declared Active after a period of inactivity. Down is displayed if
	the DLCI is inactive.
	If the DLCI was Down, this is the amount of time since the
	DLCI recovered.
	If the DLCI was never Down, this is the amount of time since
	the unit discovered that the DLCI was active in the network.
Total Tx Frames/	Total number of data frames and octets (8-bit bytes)
Tx Octets	transmitted for the selected DLCI on the frame relay link.
H Within CIR **
	H The number of frames and octets sent by the far-end device
	for on the selected DLCI of the frame relay link that were
	within the committed information rate.

HBetween CIR&EIR **

HAbove EIR **

HThe number of frames and octets sent by the far-end device on the selected DLCI of the frame relay link that were between the committed information rate and excess information rate.

HThe number of frames and octets sent by the far-end device on the selected DLCI of the frame relay link that were above the excess information rate.

HWith DE Set

HThe number of frames and octets sent on the selected DLCI of the frame relay link with the discard eligible bit set.

*Only appears for the network interface.

**Only appears for units with the SLV feature set.

6-28 July 2000 9783-A2-GB20-00