Airlink101 AIC1620W user manual Checking the Package Contents, Getting to Know Your Camera

Page 3

CHAPTER 1

INTRODUCTION TO YOUR CAMERA

1.1 Checking the Package Contents

Check the items contained in the package carefully. You should have the following:

￿One SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera

￿One 2dBi Dipole Antenna

￿One AC Power Adapter

￿One Wall Mount Kit

￿One GPIO & RS485 Adapter

￿One Ethernet Cable (Cat.5)

￿One Setup CD

￿One Quick Installation Guide

NOTE Once any item contained is damaged or missing, contact the store where you purchased the product.

1.2 Getting to Know Your Camera

￿Front and Top View

LED Indicators:

Power (left, steady amber light) indicates the camera is powered on.

Link (right, flashing green light) indicates the camera’s network connectivity.

Screw Hole* is used to attach the camera stand onto the camera by screwing the screw head of the camera stand into the screw hole of the camera.

CS-Mount

Removable Lens Internal Microphone allows the camera to receive sound and voice.

*The camera provides two screw holes that are located on its top and bottom panels, so that you can install the camera according to your application.

- 2 -

Image 3
Contents SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera Table of Content Getting to Know Your Camera Checking the Package ContentsRear View Antenna ConnectorFeatures and Benefits Networking Accessing the Camera using Web BrowserSystem Requirements Multiple Applications SupportedHome Applications Applications of the CameraConnecting Your Camera to LAN Chapter Hardware InstallationPower LED Solid Amber Link LED Flashing Green Setting up Your Camera Chapter Camera ConfigurationPage Page Page Page Page Page Viewing Image via Your Camera Method a Access Camera from SkyIPCam UtilityPage Page Indication LED Basic SetupBasic System BasicDate & Time AdministratorBasic Date & Time Basic UserGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny WPA2-PSK Network Wireless SettingPage Network Wireless WPS Setting PIN ModePBC Mode Recommended Setting up Video & Audio Image SettingVideo & Audio Camera 3GPP Video & Audio VideoCamera Microphone Overlay SettingVideo & Audio Audio Video & Audio Text OverlayPage Event Server Event Server Setting FTPEvent Server Setting Email Network Storage Event Server Setting NASMotion Detect Event Configuration General Setting Event ConfigEvent Configuration Motion Detect Trigger Event Configuration Schedule ProfileEvent Configuration Gpio Trigger Event Configuration Schedule TriggerSent to Record to Network Storage, Send Email, or FTP Upload Update Firmware Factory ResetSystem Reboot ConfigurationRS-485 Control Buttons of RS-485 About the Control ButtonsInformation Information Device InfoInformation System Log Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoSetting up Schedule for Recording Configuring the Recording SettingsPage Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap User Management Configuring the SystemConfiguring Event Trigger Event ConfigurationSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application MPEG4 Bandwidth Reference GuideNumbers Glossary of TermsHEX LAN Smtp Technical Support