Airlink101 AIC1620W user manual Motion Detect

Page 36

4.5 Motion Detect

*This function can only be configured in Windows Internet Explorer.

The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas.

To enable the detecting area, select Window 1 or 2 from the pull-down list, and then check Enable. When the detecting area is enabled, you can use the mouse to move the detecting area and change the area coverage.

-Name: Assign a name to the detecting area.

-Threshold: Move the slide bar to adjust the level for detecting motion. Make sure the threshold (the horizontal line) is low (sensitive) enough to come across the waves (appear when motion detected), so that the events (i.e, emailing snapshot, FTP uploading) you set up in Event Config will be triggered.

- 35 -

Page 35 Page 37
Image 36
Page 35 Page 37
Contents SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera Table of Content Checking the Package Contents Getting to Know Your CameraAntenna Connector Rear ViewFeatures and Benefits Accessing the Camera using Web Browser System RequirementsMultiple Applications Supported NetworkingApplications of the Camera Home ApplicationsChapter Hardware Installation Connecting Your Camera to LANPower LED Solid Amber Link LED Flashing Green Chapter Camera Configuration Setting up Your CameraPage Page Page Page Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Setup Basic SystemBasic Indication LEDAdministrator Basic Date & TimeBasic User Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny Network Wireless Setting WPA2-PSKPage Network Wireless WPS Setting PIN ModePBC Mode Recommended Setting up Video & Audio Image SettingVideo & Audio Camera Video & Audio Video 3GPPOverlay Setting Video & Audio AudioVideo & Audio Text Overlay Camera MicrophonePage Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect TriggerEvent Configuration Schedule Trigger Event Configuration Gpio TriggerSent to Record to Network Storage, Send Email, or FTP Upload Factory Reset System RebootConfiguration Update FirmwareRS-485 About the Control Buttons Control Buttons of RS-485Information Information Device InfoInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for RecordingPage Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap Configuring the System User ManagementEvent Configuration Configuring Event TriggerSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support
Top Page Image Contents