Airlink101 AIC1620W user manual Event Server Setting FTP

Page 33

4.4 Event Server

The Event Server menu contains three sub-menus that allow you to upload images to FTP, send emails that include still images, and store video clips, still images to a network attached storage (NAS).

Event Server Setting>> FTP

FTP

-Host Address: Enter the IP address of the target FTP server.

-Port Number: Enter the port number used for the FTP server.

-User Name: Enter the user name to login into the FTP server.

-Password: Enter the password to login into the FTP server.

-Directory Path: Enter the destination folder for uploading the images. For example, /Test/.

-Passive Mode: Check the Enable box to enable passive mode. If you are having trouble, you can enable/disable this mode.

-FTP Upload with: Select upload to FTP with One Snapshot image or a series image in Pre- event/Post-eventtime when event triggered.

NOTE Due to the network environment, the camera may not upload number of images that you set.

When you complete the required settings for FTP, click Test to find out if the related configuration is correct or not. Once the camera connects to the server successfully, click Apply.

- 32 -

Image 33

Contents SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera Table of Content Getting to Know Your Camera Checking the Package ContentsRear View Antenna ConnectorFeatures and Benefits System Requirements Accessing the Camera using Web BrowserMultiple Applications Supported NetworkingHome Applications Applications of the CameraConnecting Your Camera to LAN Chapter Hardware InstallationPower LED Solid Amber Link LED Flashing Green Setting up Your Camera Chapter Camera ConfigurationPage Page Page Page Page Page Viewing Image via Your Camera Method a Access Camera from SkyIPCam UtilityPage Page Basic System Basic SetupBasic Indication LEDBasic Date & Time AdministratorBasic User Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny WPA2-PSK Network Wireless SettingPage Network Wireless WPS Setting PIN ModePBC Mode Recommended Setting up Video & Audio Image SettingVideo & Audio Camera 3GPP Video & Audio VideoVideo & Audio Audio Overlay SettingVideo & Audio Text Overlay Camera MicrophonePage Event Server Event Server Setting FTPEvent Server Setting Email Network Storage Event Server Setting NASMotion Detect Event Configuration General Setting Event ConfigEvent Configuration Motion Detect Trigger Event Configuration Schedule ProfileEvent Configuration Gpio Trigger Event Configuration Schedule TriggerSent to Record to Network Storage, Send Email, or FTP Upload System Reboot Factory ResetConfiguration Update FirmwareRS-485 Control Buttons of RS-485 About the Control ButtonsInformation Information Device InfoInformation System Log Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. Click to enable/disable the speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoSetting up Schedule for Recording Configuring the Recording SettingsPage Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap User Management Configuring the SystemConfiguring Event Trigger Event ConfigurationSetting up Event Server Sending Email Notification Changing System Language Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application MPEG4 Bandwidth Reference GuideNumbers Glossary of TermsHEX LAN Smtp Technical Support