Kodak P750 manual Setting the time, date, and on/off times, Activity sensors-energy saver

Getting started

Setting the time, date, and on/off times

The first time you turn on your frame, the Time, Date, and On/Off screens appear automatically after you select your language.

To set the current date and time:

Press to change values.

Press to move to the next entry. When you’ve entered all the settings, press OK.

For details on setting the 12- or 24-hour clock, current time, date, on/off times, and energy saving activity sensor, see page 22.

Activity sensors—energy saver

The activity sensors turn the frame off if no light or sound is detected in the room; the sensors turn the frame back on when light or sound is detected (this is the default setting).

NOTE: When you first plug in your frame, the activity sensors take about 24 hours to adjust to the typical light and sound levels in your home environment. During the first 24 hours, your frame may turn on and off at unexpected times.

If you prefer, you can turn off the sensors—then turn the frame on and off manually or set daily automatic on/off times. For details, see page 23.

www.kodak.com/go/support 5