Kodak P750 manual Screen messages, Screen message Try one or more of the following

Troubleshooting and support

If...	Try one or more of the following
You set automatic	If your frame loses power, the clock returns to the factory setting and
on/off but the frame	auto on/off times are disabled. See Re-setting your frame after losing
doesn’t turn on and off	power, page 31.
at the specified times.
Screen messages

Screen message	Try one or more of the following
File is bad.	The frame cannot display the picture because the file is
(usually preceded by the file name.	corrupted or it’s an unsupported file format (see page 32).
For example: xxx_xxxx.JPG file is	NOTE: Videos are not supported.
bad)
Write failed. Select another	The frame was unable to copy the picture.
location.	■ Insert a different card or device (page 6).
Error attempting to open file or	■ Turn off the frame, then turn it back on. Press and
directory.	hold the power button (for about 2 seconds), then
	release. If the problem persists, contact customer
Error occurred while closing a file.
	support help, at
	www.kodak.com/go/digitalframesupport.
Error invalid filename.
Error reading from file.
Error writing from file.
Error writing a file.
Error writing to a file.
File Copy Failed!
Internal error.
Parameter is invalid.
Unknown error.
30	www.kodak.com/go/support