Kodak P750 manual Additional care and maintenance, Replacing the remote control battery

Appendix

■Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support.

■In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support.

■Dispose of batteries according to local and national regulations. Go to www.kodak.com/go/kes.

Additional care and maintenance

■Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure.

■Service agreements are available in some countries. Contact a dealer of KODAK Products for more information.

■For digital frame disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance at www.eiae.org or visit www.kodak.com/go/digitalframesupport.

Replacing the remote control battery

Replace the battery with a lithium coin-type CR2015 battery, Kodak part number 4H7032. For proper disposal, go to www.kodak.com/go/kes.

	1	Remove the battery cover. Remove the
2		old battery.
	2	Place the new battery in the
		compartment with the contact side
		down, printing and + sign up.
	3	Replace the battery cover. Insert tabs
1	3	and press the cover down until it clicks
		into place.
34		www.kodak.com/go/support