3
Solving frame problems
For
If... | Try one or more of the following | |
Frame does not | ■ Make sure the power cable that was included with your frame is | |
turn on. | connected securely (see page 3). | |
| ■ Unplug the power cable from the frame. Wait 5 seconds, then | |
| reconnect the cable. | |
| ■ Press and hold the power button for 1 second. | |
|
| |
Nothing happens when | ■ Insert a certified SD/MMC/MS/xD card with images into the | |
a memory card, camera, | designated card slot, then push to seat it (see page 7). In the top | |
or USB device is | card slot, make sure the card is seated flush with the case. | |
■ Make sure the USB cable that was included with your camera or USB | ||
connected. | ||
NOTE: A large picture file or | device is connected securely (see page 8). | |
■ Make sure the file format of your pictures is supported. See the | ||
images on a large capacity | ||
card may take longer to | extended user guide at www.kodak.com/go/digitalframesupport. | |
appear. |
| |
|
| |
Touch border doesn’t | ■ Use your finger to make your selections on the Quick Touch Borders | |
work. | (see page 5). | |
| ■ Unplug the power cable from the frame. Wait 5 seconds, then | |
| reconnect the cable. Press and hold the power button for 1 second. | |
|
| |
Frame freezes up. | ■ Unplug the power cable from the frame. Wait 5 seconds, then | |
| reconnect the cable. Press and hold the power button for 1 second. | |
| ■ Use a paper clip or other slim object to press the recessed reset | |
| button on the back of the frame (see page 20). | |
|
|
www.kodak.com/go/digitalframesupport21