Kodak P720 manual Resetting the clock after losing power, Troubleshooting and support

Page 29

		Troubleshooting and support

If...		Try one or more of the following
Frame freezes up.		■ Unplug the power cable from the frame. Wait 5 seconds, then
		reconnect the cable. Press and hold the power button (for about 2
		seconds), then release.
		■ Use a paper clip or other slim object to press the recessed reset
		button on the back of the frame (see page i).

You set automatic		■ Make sure you Enabled the on/off setting after you set the times,
on/off but the frame		then press OK (not Back). See page 19.
doesn’t turn on and off		■ If your frame loses power, the clock returns to the factory setting
at the specified times.		and auto on/off times are disabled. See Resetting the clock after
		losing power, page 24.

Resetting the clock after losing power

If you turn off the power on the frame or otherwise lose power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled.

■When you turn the frame back on, the set time screen appears on the frame.

■Slide to set the hour. Tap the left/right arrows to highlight the previous or next setting (hour, minutes), then slide to adjust the setting.

■Tap OK.

The Home screen appears. The time is reset and the automatic on/off times (if set) are re-enabled. It is not necessary to reset the on/off times.

NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and re-enable the automatic on/off times (see page 19). It is not necessary to reset the on/off times.

www.kodak.com/go/support

24

Image 29

Contents Kodak EasyShare P720 digital frame Eastman Kodak Company Rochester, New York Back/Side View Front ViewTable of contents Table of contents Attaching the frame stand Setting up your frameTurning on your frame Attaching the power cableUsing your frame’s touch border Slide to find your language, then tap OK Setting your languageEnjoying your pictures immediately Inserting a memory card Connecting a digital camera or other USB deviceTurning off your frame Power off-Unplug the power cableChanging your frame orientation Remove the stand, turn it 90 , and replace as shown seeMounting your frame on the wall Tap Home Accessing your picturesViewing thumbnails multi-up Running a slide showHome screen, then tap Slide show Display the icons, or from single view, tap Multi-upViewing pictures by filename Viewing a single pictureMenu, then tap To rotate a picture, tap Menu, then tapTap Close to close the menu To copy multiple pictures, see Copying picturesHighlight a picture to copy Copying from your computer Pictures are copied to the memory card or USB device Copying pictures from EasyShare softwareMy Collection Select pictures here Selecting multiple pictures Deleting picturesThumbnails view page 9, tap Select All Select/Unselect allSettings menus Changing frame settingsDoing more Manually setting the clock Setting the clock and timerSetting automatic on/off Tap Enable, then OK when you’re doneUpgrading your firmware Place the EasyShare software CD into the CD-ROM drive Installing the softwareLearning more about your frame Customizing your frameMaintaining your frame and mattes Picture frame problems Troubleshooting and supportTroubleshooting and support Resetting the clock after losing powerScreen message Try one or more of the following Screen messagesScreen message Try one or more of the following Appendix Digital frame specificationsImportant safety instructions Limitations Limited warrantyLimited warranty coverage Outside the United States and Canada Your rightsFCC and Industry Canada FCC compliance and advisoryCanadian DOC statement N137China RoHS Russian GOST-RKorean Class B ITE Licensing Error messages Safety, 28 brightness, screen, 18 button Macro/landscapeSetting Setting first time From EasyShare softwareViewing options, 18 setup CleaningRunning Slide transitions, setting, 18 software Loading softwareViewing