Pacific Digital MF-810S user manual Resume Picture Show, Delete All Slides in MemoryFrame

Main Menu

Resume SlideShow

Configure Slides

Delete All Slides in MemoryFrame

Copy Pictures from Camera/Reader

Fill MemoryFrame from Camera/Reader

Run Slideshow from USB drive

Preferences

(Press Rev/Fwd buttons to move Up/Down. Use ‘Select’ button to choose)

Figure 17 Main Menu

Some items in the main menu execute the listed task, while other items in the main menu each launch a sub-menu for the described function. Each of the options in the main menu is described below. Once in the Menu system, hitting the Menu button again will return you to the previous menu.

9.2.1Resume Picture Show

When you wish to exit the Menu system, you can either push the Menu button again or alternatively use the appropriate button (Forward (Ź) or Reverse (Ż) ) to highlight the Resume SlideShow menu selection and then press the Select button. This will resume the slideshow from the last picture that was displayed before entering the Menu system.

9.2.2Delete All Slides in MemoryFrame

Selecting this will cause all stored pictures in the MemoryFrame to be permanently deleted. One may wish to do this if the goal is to subsequently fill the entire MemoryFrame from a camera, thumbdrive or card-reader (See section for “Fill MemoryFrame from Camera/Reader”).

Copyright© 2002-2003 Pacific Digital Corporation Page 36