HOW to USE the Integral Stand Support

Nextbase Gallery 15 - User ,s Guide

Offer the Gallery 15 to the frame mount ensuring that the remote control sensor in aligned with the remote control window. Press down & click in to place securely.

Remote control sensor

Remote
control window	Frame Mount	Gallery 15

1.Choose your favorite 10'' X 8'' frame.

2.Mount Gallery 15 into the supplied Nextbase frame mount.

3.Then mount the frame mount, (with Gallery 15) into the standard 10'' X 8'' wooden frames, and fix securely.

Nextbase Gallery 15 can be placed on a table top using the integral support. The Gallery 15 can be positional horizontally or vertically on desired.

1.Pull out the support from the back of the Gallery 15.

2.Rotate the support to either horizontal or vertical modes as required.

3.Adjust the length of the support by sliding the "Lock-Unlock latch, and then pull the support stand to the desired length.

4.Push the latch to lock to fix the position.

5.Lean the gallery 15 back to the desired position.

General Introduction

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn