CONNECT TO THE 8'' X 6'' FRAME
Nextbase Gallery 15 can match with all standard 8'' X 6'' wooden frames as shown below:
1.Match the standard 8'' X 6'' frame with Gallery 15.
2.Move the locking latches upon the frame to secure the Gallery 15 in place.
3.If the chosen frame does not have its own locking latches, then use the metal connectors built in to the Gallery 15 for this purpose. Withdraw the metal connectors on shown below. Attach to the frame using screws supplied.
Slide out both sides
Note: Remote control is not possible if the sensor is blocked by the frame.
CONNECT TO THE 10'' X 8'' FRAME USING THE FRAME MOUNT
Your Nextbase Gallery 15 can match with all standard 10'' X 8'' wooden frames by using the Frame Mount contained in the accessories:
10
General Introduction
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn