Philips CMQ205/00 user manual Your car power, Amplifier, Introduction, What’s in the box

Page 4

2 Your car power

Overview of the main unit

amplifier

 

English

Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Introduction

With the amplifier, you can enjoy high quality sound performance with powerful bass and beats.

What’s in the box

Check and identify the contents of your package:

aAmplifier

bScrew (25mm) x 4

cFuse x 1

(30A)

aINPUT L/R

• Connect car audio with RCA cable.

bOUTPUT L/R

To connect additional amplifier with RCA cable for additional speakers.

cINPUT LEVEL

• Adjust input level (0.3V to 6V).

dFILTER MODE

Set frequency filter at LPF (low-pass- filter), HPF (high-pass-filter), or OFF (flat) mode.

eLPF FREQUENCY

Set LPF (low-pass-filter) frequency from 80Hz to 120Hz.

fBASS BOOST

Boost frequency for around 50Hz, 12dB.

gPOWER/PROTECTED

Light in green when the amplifier is switched on.

Light in red when the amplifier is abnormal and protected.

hSPEAKER OUTPUT

• Connect to speakers or subwoofers.

EN 5

Image 4
Contents Register your product and get support at Contents Safety Koninklijke Philips Electronics N.V. All rights reservedYour car power AmplifierIntroduction What’s in the boxMount the amplifier in car InstallationMount the unit with the supplied screws Connect speakers Connect powerConnect car audio Less than 450mm 18 Fuse 40A +12V car battery To a metal point of the car Remote output Car audio unitUse your power amplifier Product information Replace fuseSound is too low TroubleshootingAlternate noise is heard