iFUSE: 30AX1
jPOWER
•To connect
3 Installation
Note
•Follow all mounting and wiring instructions.
Mount the amplifier in car
You can mount the amplifier either under a seat or on the rear tray.
Note
•To avoid interference, do not place the amplifier too close to the car audio or antenna.
•The supplied mounting screws are 25mm long. Make sure that the mounting board is thicker than 25mm.
1 Place the unit on the location for installation.
2Mark the positions of the four screw holes.
3Drill the holes with driller of approximately 4mm in diameter.
4Mount the unit with the supplied screws.
6EN