Philips CEM3000 user manual Turn beep sound on/off, Select blackout setting, Turn demo mode on/off

•[TREBLE LEVEL] range: -7 to +7

•[TREBLE CFQ] (treble center frequency) range: 10.0k, 12.5k, 15.0k, 17.5k.

•[BALANCE] range: 12L to 12R. (L= left speaker, R = right speaker)

•[FADER] range: 12R to 12F. (R = rear speaker, F = front speaker)

•[ZONE DEP] (zone depth) options: DEPTH 1, DEPTH 2, DEPTH 3, DEPTH 4.

•[RESUME]: Resume the preset EQ value to factory default value.

3Rotate to select a value/option.

7Adjust system settings

Turn beep sound on/off

Each time you press a button, the unit beeps. You can turn on or off this beep sound.

1Press MENU.

2Press/ repeatedly until [BEEP] displays.

3Rotate to select a setting:

•[BEEP ON]: Turn on the beep sound.

•[BEEP OFF]: Turn off the beep sound.

Select blackout setting

You can set the screen to turn off automatically after the unit is idle for 10 or 20 seconds.

1Press MENU.

2Press / repeatedly until [BLKOUT] displays.

3Rotate to select a setting:

•[BKO 10 S] : Turn off the screen automatically 10 seconds after last operation.

•[BKO 20 S] : Turn off the screen automatically 20 seconds after last operation.

•[BKO OFF] : Never turn off the screen.

Turn demo mode on/off

1Press MENU.

2Press / repeatedly until [DEMO] displays.

18EN