Actron 9640A manual Program Mode, He Sc Tool, Abcdefghijklmno

Help & Troubleshooting

If the scan tool expe e	ced a problem in transmitt ng, check connections and
try again.
TRYING PRINT AGAIN sends print test information to the printer. Use this
selection if you find the cable is not properly installed, or the printer is not on or
on-Line. If any of the me	ioned conditions were found, correct them and select
Print Again. garbled or no print may			e caused by the interface settings. You
can change the Scan Tool’s		ttings if nec ssary. See section “Printer Inter-
face” on page 3-4 of Using		he Sc	Tool.

PROGRAM MODE

The Prog am Mode accessed from
the Main Menu. This mode is u ed for
updating the Scan Tool software.
Instructions are provided with the new
software.	---PrintTest]---
!"#$%'()*+,-./
0123456789:;<=>?@ABCDEFGHIJKLMNO
TECHNICALPQRSTUVWXYZ[\]^SUPPORT		'abcdefghijklmno
pqrstuvwxyz{}~
• Toll-Free Number: 1-800-228-7667
• e-mail:tech_support@actron.com. Main`PrTolSeoMenugramModetuplf-Test			~]

8

8 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •