Actron 9640A manual Manual Info, Read Codes, SelectReadCodes from the Chrysler, Arrow to view DTCs

Section 7 – Chrysler Diagnostics

✓Due to different processor calibrations used, the function list for a partic- ular vehicle may or may not appear as shown. Based on the vehicle infor- mation entered at the Vehicle Setup menu, the tool recognizes the computer system installed.

✓If an Error Message displays, make sure the adapter cable is securely attached, and the ignition key is ON. Cycle the ignition key to OFF for 10 seconds, then ON. This may be required to reset the computer. If required, select YES to try again. If the problem still exists, refer to “Error Mes- sages” on page 8-2.

✓

✓

This section covers Chrysler vehicles manufactured from 1989 to 1999. Chrysler vehicles manufactured from 2000 to present automatically use Global OBD II Diagnostics.

Screens and functions may differ slightly for vehicle make and year.

MANUAL INFO

Instructs the user what section of the manual to use. This section covers Chrysler Diagnostics.

READ CODES

The Read Codes function enables the tool to retrieve and display any specific emission-related Diagnostic Trouble Codes (DTC) stored in vehicle’s memory. This function can be performed KOEO or KOER.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 1

SelectReadCodes from the Chrysler
Functions list and press				.
Perform the following.
1)	Set Parking Brake
					7
2)	Turn Key On-Engine Off or Running.
3)	Put Transmission In Park Or Neutral.
		Keep hands and Tools away from fan and ngine uring
! CAUTION
		test.
If no DTCs have been stored in vehicle’s
memory, a System Pass screen dis-
plays.
If not, press the		arrow to view the
DTCs.		DOWN	ENTER	UseNoFaultsDetectedSystemPass:ChryslerFunctins3`1)ForReferenceWriteDownCodes2Red)EraseToViewCodeCodesTempCodes..~[