Actron 9640A Select View Freeze Data from, Responding.Continue, Obdii Function List and press

Global OBD II Diagnostics
After making a selection, press					to establish a communication link. Mul-
				ENTER
tiple PIDs may be sent if the vehicle is equipped with more than one computer
module — Powertrain Control Module (PCM), Transmission Control Module
(TCM), etc. The scan tool identifies them by their identification names (ID)
assigned by the manufacturer (i.e. $40 or $1F).
If the Scan Tool receives multiple
responses for a PID, such as MIL STA-								N
TUS, it displays the PID and with the					Module$1Fisnot
.
computer module ID blinking in paren-					ENGINE(RPM)($10)A			56[
Select View Freeze Data from the
							261~
theses.
If one or more control modules stops
responding, the tool displays a mes-
sage that it is not responding.					Responding.Continue
If you choose to continue, dashes will
replace the data in the right-hand col-
umn. If NO is selected, then the scan
tool attempts to reestablish communi-									4
cation with that module.
Press	to return to the		OBDII Functi List.
VIEW FREEZE DATA
When an emission-related fault occurs, certa n vehicle conditions are recorded
by the on-board computer. This information s referred to as a Freeze Frame
data. The information is a “snapshot” of the operating condit ons at the time of
a fault. This data can be overwritten by faults with a h gher pr ority.							vehicleOFF
✓ If codes were erased, then freeze frame dataILSTATUS(may not be stored$10)A
memory.					Withoutit?	<No>~
OBDII Function List and press
The scan tool links to the vehicle, veri-
fies the PIDs and displays the data. Use					Yes
the	arrow keys to move
• • • • • • •ENTER• • UP/DOWN• • • • • • • • • • • • • • • • • • • • • • • • • • •TROUBCOEP0443`OBDIIFunctionList• 65Data4Erase• •)V• •ANT(oFiw• • • •FreezeData•Codes• • • • • • • • • 12• • 4~]– 5
throughFUNCthe list.
If more than one computer module
responds with freeze frame data, then
the frame number and module display
on the first line. Press the		LEFT/RIGHTCALCLOAD(%)95ABSLTTPS 365[.0~
key to change modules.
When done, press the				key to
return to the OBDII Function List.