Actron 9640A manual Select Erase Codes from the Ford, Press After each message, Tion Li t

Ford Historic Self-Test Routines

Erase Codes

The vehicle service manual may recommend erasing Continuous Memory Codes from vehicle’s memory, and then drive vehicle to duplicate the malfunc- tion before beginning a diagnostic test. If KOEO codes were read using Fast Codes, the memory codes have already been erased.

Only Continuous Memory Codes can be erased from the vehicle without repair- ing the fault. To remove KOEO and KOER Codes, the fault must be repaired since they only exist when a fault exists.

EEC-IV Erase Codes

	Select Erase Codes from the Ford
	Function List and press			.	Frd	Functin	List
			ENTER
	OnlyMemoryCdes				ToEraseeviewKOEOAnd
	MECS EraseENTERC des				5)Wiggletest
	Press	after each message.			KOER
	AErasable!					Cods,YuMust
	PssENTERtre		oCont~		Fix	Causeof	Code.
					PressENTERto			Cont~
	Follow all instructions on the display.				3	Codes			]
	1) Turn Ign Key Off.
	2) Tran missi n In Park Or Neu ral.
6	3) Wait 10 Seconds.
	4) Turn Ign Key On.
	Press	to egin erasing the
	codes. The procedure akes less 1
	minute to run.
	Press	to return o the F		rd Func-
	tion Li t.				`4				[
	Select Erase C des from the Ford
	Function List and press			.
	Press		ENTER
		after each message.			PEroceduresingCodesRunsLess
	6 – 6• • • • • • • •FUNCENTER• • • • • • • • • • • • • • • • • • • • • • • • •`4EraseFordFunctiListT•imeRemaining=0:53~h•53Reviewa•)•Wiggletest• • 1Minute• • • • • • • • • •.• • • • • • •[]•