Actron 9640A manual Select FastCodes orSlow Codes and press

Ford Historic Self-Test Routines

Select FastCodes orSlow Codes and press		. Follow the instructions
step-by-step.
1) Set Parking Brake.
2)	Put Transmission In Park Or Neutral.
3)	Turn A/C Off.
4)	Start Engine — Let Idle Until Hot.
5)	Turn Ign Key Off.
6)	Wait 10 Seconds. Turn Key On-Engine Off. Do Not Start Engine.

Avoid Cooling Fan! It May Turn On During Test.

! CAUTION

While waiting for the codes to transmit, the PCM cycles the following system components On and Off:

	• Electric radiator cooling fan					ENTER
	• Fuel pump
	• Check engine light or Malfunction
	Indicator Light (MIL) – slow codes only.
	• Idle speed control solenoid
	After performing these steps, wait for
	the tool to retrieve DTCs. When the test
	is done, turn Ign Key OFF and press
		.
	The KOEO codes transmit before the			Procedure						Less
6
	Continuous Memory codes. Use the
	codes.	arrow key to begin viewing
	If no problems exist, Code 11 or 111 will
	be displayed.				han		3Miute.Runs
					ime		Remaining=1:56
	If vehicle problems exist, codes are set.					TestCompleted
	Use		arrow keys to view
	codes. Write down codes for reference.
	ENTER
				PssIgnENTERKeyToOffCont.
	✓ Continuous Memory Codes (codes set previou ly und							r	ormal	iving
	conditions) are available after reading					Cod . Th		y	in	icated
	as Memory Codes by the scan tool and are transm tt d								f	KOEO
	Codes.			Us			to	viewCodes.
	DOWN
				W		ite	Down
	6 – 2• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •TurnF• • • • • • • • • • • • • • • •.• • • • • • • •
	UP/DOWN			KOEOClutchSlippagExcessConvDuringKOEOTNSystemPassoFaultsReferenceCodeDtcedCodesrter.t628111[~]