Actron 9640A manual Tests, Select Koer Switch from the Quick, To begin Scan tool

Ford Enhanced (OBD II) Diagnostics

Select KOER Switch from the Quick
Tests screen. Press	ENTER	to begin	]
scan tool.		GlowPlug
the test.

Exhaust gases are harmful or FATAL. Always operate vehicle in a well-ventilated area.

The KOER switch test is done with the engine running.

Do not over-rev engine. Observe all safe y precautions.

Follow all user interaction required to run the

Self-Test

The tool

will display a prompt when action is required.

Perform the following as displayed on the tool screen:

1) Set Parking Brake.

2)

Transmission In Park Or Neutral.

3)

Turn A/C Off.

4)

Start Engine — Let Idle Until Hot.

5)

Turn Ign Key Off.

6)

Wait 10 Seconds. Start Engine — Let Idle.

Press

to start the test.

QuickTestsCyl.Cont.

Do the following as instructed by the

1)

Release parking brake, set and

`KOERSwitch

~

release again.

6

2)

Press speed control ON, OFF,

SET, COAST, & RESUME buttons.

3)

Press Transmission Control (Overdrive swi ch) or Clutch.

4)

Depress and release brake pedal.

When the vehicle has finished the test, the DTCs fou

d display on the screen.

If no codes are read, the System Pass scre n is displayed.

Use

arrow keys to view

Codes.

Press the

key to return to the

Ford Function List or

to return

to the Quick Tests screen.

O2 Monitor TestFUNC

Refer to “O2 Monitor Test” on page 4-6 of Gl bal O

II Diagno tics.

Non-ContinuousENTER

Tests

estInProgress

Refer to“Non-ContinuousTests” on page 4-7 of GlobalOBDIIDiagnos ics.

Approximate

3:00

On-Board Systems

TimeLeft

6 – 26 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •WriteUse[ToViewDTCsDTCsFound:3• •ForReference• • • • •Down• • • • • • •Codes• • • •.• • • • •~•

UP/DOWN

BACK

Refer to “On-Board Systems” on page 4-PressBACKtoQuit7 of Global OBD II Diagnostics~.