Actron 9640A manual Print Data, Printing Data except Playback, Interface on page 3-4 of Using

Global OBD II Diagnostics

PRINT DATA

	This function allows you to print the
44	diagnostic information stored in the				OBDIIFunctinList
	OK.
	Scan Tool.
	The scan tool’s internal battery power					ChagPrinteSettings?
	can be used to print data.
	Select Print Data and press the
		key. The scan tool informs you			ToolSeToDefault
	ENTER
	of the printer settings (Custom or					Pri			.
		ENTER								~
						Is<YES>Printout		NOK?
	Default), then asks if you wish to
	change them.
	To change the settings, refer to “Printer
	Interface” on page 3-4 of Using The
	Scan Tool. Select NO and press the					key to b	gin pri	.
	If the printout is OK, select YES and					3Review				]
	press		. Refer to the settings in
	the printer manual if the printout is not
	Printing Data (except Playback)
	Next, select the data to be printed and				`4		Data			[
	press		. The scan tool displays		1)5Code		Lookup
	4 – 12 • • • • • • •ENTER• • • • • • • • • • • • • • • • • • • • • • • • • • • • •Sent--• •Please•To• • •Printer•miting• • •WaitData• • • •--er• • • • • •
	the menu of those functions that store
	data and can be printed.
	✓ Make sure the printer is turned on, on-line and onn						cted.
	When the selected data does not exist in the scanYESool’s mem ry,<N>message~
	informs you to run the function.
	If the selected data is stored in the scan
	tool, the data automatically transmits toENTER
	the printer.
	Press		to return to the Select		PressENERToCont.
		ENTER		BACK
	Print Data screen. Either select
	another item to print or press			to
	return to the OBDII Function List.				`Select3P2Rad1)I/MReadinessTransPrintingCodesCodes					~[