Actron 9640A manual Recorded data, Ta List header th, Ta r, Playback Use, Display Will

Ford Historic Self-Test Routines

If data is recorded, the tool will prompt the user to playback data as an Entire Data List or a Custom Data List. Refer to “Viewing Data” on page 3-9 of Using The Scan Tool for help on Data Lists.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 17

After selecting the data List type, press

the

key to start playing back the

recorded data.

The Playback Data screen has a Vehicle D

ta List header th

marks the

beginning of the data list. On the Playback D ta sc

en, lin s 1-3 are u ed to

display vehicle data parameters. The fourth li

di plays the Fr

me number

and Time in seconds.

Negative frames and timestamps indicate d

ta r

corded before

he tr gger

event. Positive frames and timestamps indic

te da

ec

ded

f er the trigger

event.

Use the

arrow keys to view the recorded

ID d

of each frame.

The end of the list is reached when only the

(up)

on is v sible.

As:

Playback

Use the

arrow keys to scroll b

ck and forth through the frames.

The

`1)Entire

arrow key advances to the next fr

, “wrapp ng around” to the

2)CustomData List

earliest frame when the final frame is reached. The

a ow key goes back

to the previous frame, again “wrapping arou d”

o the final frame.

~

6

✓ After reaching the last time interval

recorded.

The

display

will

change from data recorded after trigger to data

corded before. This is

normal. The

arrows may be used to scroll through all time

intervals in either direction.

BOO-Brake

Sw

TheENTERFrame index is very similar to the TimeCanstPurgeindex. A Frame a “snapshot”ON]of

engine operating conditions at that moment.

he

numb

r increases

ECT

Sensor(v)

3.3[

every time the vehicle’s PCM transmits data across the com

unication link.

Frame:16Time: 24.7~

Remember, not all Ford vehicles use the same number of PIDs. For this reason,

not all vehicles will start and end with the same Frame number. The vehicles

with less PIDs will have the greater Frame number range. Like the Time index,

Frame 0 is the trigger point. Thus, negative Frame numbers contain data prior

to the trigger point, and positive Frame numbers contain data after.

If you wish to change the Custom Data List parameters, press the

key

to return to the Playback Data As: menu. When you have finished playing back

a recording, press the

key to return to the Ford Function List.

UP/DOWN

]

LEFT/RIGHT

LEFT

RIGHT

LEFT/RIGHT

BACK

FUNC