Actron 9640A manual SET Basic Time, To the Chrysler Functions list

		Chrysler Diagnostics
		Select Reset EMR Lamp from the
		Chrysler Functions list and press				ChryslerFunctions
			.
		ENTER	.			9)Sensor	Test				]
										Info
		Turn ignition key On, but do not start				0)Controller					[
		engine.
		Press		to reset the EMR lamp.
		Press the		or	key to return
		to the Chrysler Functions list.
	SET BASIC TIME
		TheSetBasicTime function is used when c ecking basic timing. This feature
		suspends spark scatter at idle. Other tests, such as Sensor							,	be per-
		formed concurrently with this mode.
		Select Set Basic Time from the
		Chrysler Functions list and press
		ENTER		Keep hands and Tools away`11)ResetEMRLampfrom fan and engine during
		! CAUTIONENTERtest.EMRLampIsChrysler`2S13Rview4)PrintBasiFunionscResetTime.]~[
		Connect a strobe timing light and perform ALL steps as prompDataed by the tool~
		screens as follows:
7
		1) Set the Parking Brake.
		2) TransmissionFUNCinBACKpark (P) or neutral (N).
		3) Turn A/C Off.
		4) Start engine and let idle until hot.
		5) Turn ignition key Off.
		6) Wait 10 seconds. Start engine and let idle.
		7) If vehicle has a manual transmission, release clu ch.
		Press		and then select a request
		mode. Depending on the vehicle, some				`Select3SetSyncMode2Init1)AbolshRequestiateTimingRequest Mode~[
		ENTER
		Request Modes may not be available.
		✓ Set Sync Mode is available on 3.9L, 5.2L and 5.9L engi						only.
	7 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •