Actron 9640A manual Switch Test

		Chrysler Diagnostics
		IfManualTrigger is selected, the scan
		tool initializes by recording the first five
	SWITCH TEST				PressStop	Automatically
		frames. When done, press		.	PressENTERStopRecordinExit
		IfTriggerOnCodes was selected, then			ToStart		g.
		the scan tool triggers when a DTC is			CodeToTriggerThTrouble
7		stored in the vehicle.			**RecordinBACKTogData*
		SelectSwitchTest and press		.
		Press the	key twice to return to
		the Chrysler Functions menu.
		The scan tool recording time varies. A
		recording consists of 5 frames of data
		prior to the trigger and several frames			FRAME:14f29
		after the trigger. The amount of PIDs
		recorded determine the number of
		frames.			PlaybackData?
		Select a switch to be tested from the list
		After a recording, the Scan Tool dis-			**Ready		ord**
		plays a prompt to playback the record-
		ing. Answer NO to return to the
		Chrysler Functions menu.
		Answer YES to display recordedENTERdata.				ENTERAnytime
		The Switch Test is used to test the operation f sw				hes on vari us Chrysler
		vehicle systems. These systems may include cru				cont l, A/C,	k ng, and
		the shift lever position.			WaitingFor
		✓ Because of differences in vehicle designs, theStartofSwi h Test m y not testg
		the sameBACKswitches in every car.
		✓ Switches for the Engine and Transmission are combined into one l					when
		applicable.
		and press	.		<YES>NO			~
	7 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •SelectSWTo`6SwitchTesChryslerFuncions• •87Actuator•)•IdleSpeedTest~• • • • • • • • • • •Test• • • • • • • •][•
		ENTER		ENTER	ASD/CCLCHRELVOTSSENSREAY