Actron 9640A manual Reset EMR Lamp, Tions list, Select Controller Info from

	Chrysler Diagnostics
	One sensor will be displayed per
	screen. Use the			arrow keys
		UP/DOWN
	to scroll through the supported sensors.
	The tool displays the status of the sen-					FUEL(%)			~
.
	sor.
	Press the		or	key to end the test and return to the Chrysler Func-
	tions list.
CONTROLLER INFO
	Controller Information provides additional specifications on the PCM and
	vehicle under test, such as:
	• Internal PCM ID number
	• Emission Type (Federal, California, Canadian, etc.
	• Fuel type
	• Model year of car (controller)
	• Turbo or non-turbo engine
	• Engine Controller			type
	• Engine size
	• Car or truck application
	• Transmission type
	• Drivetrain layout (front or rear drive)
	✓ Controller Information varies from vehicleViewingSensor:to vehicle.
	Select Controller Info from the				ADPT				5.00[
	Chrysler Functions list and press
	vehicle is driven a pre-programmed numberhryslerof mil . TheFunctionstool an do this by
	ENTERresetting the EMR codesENTERinside the vehicleID#1352782893098473Controller`1995.PCM9)Sensor5L0)Controller1)ResetEMRLamp. TestInfo:Info[~]
	Turn ignition key On-Engine can be Off
	or Running. Press			and the
	scan tool willBACKFUNCbuild the Controller Info
	list.
	After retrieving the Controller Infor-									7
	mation, the tool displays the informa-
	tion. Scroll through the list using the
	arrow keys.
	UP/DOWNBACK		FUNC			tu	to the Chrysler Func-
	Press the		or	key to end the test and
	tions list.
RESET EMR LAMP
	✓ (Trucks and Vans Only)
	The Reset EMR Lamp function should be pe fo m d after							rvicing the vehi-
	cle’s emissions control systems. Some Chrysler v					hic	are	quipped with an
	Emission Maintenance Reminder (EMR) lamp. The EMR is i uminated after the

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 9