Global OBD II Diagnostics

NON-CONTINUOUS TESTS

The Non-Contin(Non-Continuous) Tests obtains test results for emis- sion-related powertrain components and systems that are not continuously monitored. TheNon-ContinTestfunction is useful after servicing or after eras- ing the vehicle’s memory. Test results do not necessarily indicate a faulty com- ponent or system.

The scan tool asks the vehicle for any available non-continuous test IDs, and then displays them in a list. The vehicle manufacturer is responsible for assign- ing the test and component IDs.

Select Non-Contin Tests from the

OBDII Function List and press

.

A list of tests applicable to the vehicle

ENTERare displayed. Select a test and press

.

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

The scan tool displays the test ID, sys-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tem or component (ID), test measure-

 

 

 

 

 

 

 

 

 

 

 

ment (MEAS), specification value

 

 

 

 

 

 

 

 

 

 

 

(SPEC) and status (STS).

 

 

 

 

 

 

 

 

 

 

 

Refer to the appropriate vehicle service manual f r test IDs and def nitions.

 

 

Test results requested by the scan tool mayOBDIIalso incl

de

li

its.LiOnly one

 

test limit is included in the response message a

d displayed

he

cr en. The

 

 

 

 

72Monitor

Tests

]

 

test limit could be either a minimum or a maximum test limit.

 

 

 

 

 

 

8

 

Function-Conti

 

 

The Test Measurement and Specification values9)ONonare-BoardSystemshexadeci l numbers

 

(i.e., $1A, $FE, $11). The status is calculated by the scan tool u ing the mea-

 

surement and specification data. Status is either LOW, HIGH, or OK.

 

 

Press the

key to return to the Non-Cont

ests Avail menu or press the

 

key to return to the OBDII FunctionNonList.-ContTests Avail

 

 

ON-BOARD SYSTEMS

`

 

5

 

 

 

 

 

 

 

 

This test allows the scan tool to control the operation$10

of vehicle components,

 

tests or systems. Some manufacturers do not allow tools to control vehicle sys-

 

tems. A vehicle not supporting an on-board system is identified by

 

message

 

displayed when selected.

 

 

 

 

 

 

 

 

 

 

 

Refer to the appropriate vehicle serviceTESTmanual$01for on-board systems

 

 

instructions.

IDMEASSPECSTS4861C000minLow763876 OK~[

 

ENTER

BACK

 

 

 

 

FFFFmax

 

 

 

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 7

Page 39
Image 39
Actron 9640A manual NON-CONTINUOUS Tests, ON-BOARD Systems, Select Non-Contin Tests from Obdii Function List and press