Receive traffic announcement
If you want to receive traffic announcement, enable the TA (Traffic Announcement) function.
1
2
3 Rotate to select a setting.
•[TA ON]: When a traffic announcement is on air, the system automatically switches to the tuner mode and begins to broadcast the traffic announcement. When the traffic announcement is over, the system returns to the previous mode.
•[TA OFF]:Traffic announcement does not cut in.
Tip
•When a traffic announcement cuts in, you can press to switch the system to the previous mode.
Synchronize the system clock
You can synchronize the system clock with an RDS station that transmits time signals.
1
2
3 Rotate to select a setting.
•[CT ON]: Synchronize the system clock with the RDS station automatically.
•[CT OFF]:The automatic clock synchronization with RDS station is disabled.
Tip
•The accuracy of time depends on the RDS station that transmits time signals.
6Listen to DAB radio stations
Note
•Make sure that the DAB radio receiver is securely connected.
•For optimal reception, securely connect a DAB radio antenna to the DAB radio receiver and extend it.
•Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area.
Switch to DAB mode
1 Press AS/SOURCE repeatedly to switch the source to [DAB/DAB+].
2 Press / repeatedly to select a band: DAB1, DAB2, or DAB3.
Scan for on-air stations
Note
•The operation does not replace the stations that are programmed in each band.
1Press and hold to access the system menu.
»[DAB SCAN] is displayed.
2Press .
»[SCANNING] is displayed.
»The product starts scanning for
»The detected stations are saved in the flash memory.
EN 15