Connect wires
Note
•Make sure that all loose leads are insulated with electrical tape.
•Consult a professional to connect wires as instructed below.
1Check the car's wiring carefully and connect them to the the supplied ISO male connectors.
h | Black strip | Ground |
i | Yellow strip | To the +12V car |
|
| battery which is |
energized at all times
2 Connect other wires if necessary.
a b
| ISO male connectors | Connect to |
1 | Green strip, | Rear left speaker |
|
| |
| strip |
|
2 | White strip, | Front left speaker |
|
| |
| strip |
|
3 | Gray strip, | Front right speaker |
| gray strip |
|
4 | Purple strip, black- | Rear right speaker |
| edged purple strip |
|
e | Red strip | Ignition key +12V |
|
| DC when ON/ |
|
| ACC |
f | Blue strip | Motor/electric |
|
| antenna relay |
|
| control lead |
g | Amplifier relay | |
| strip | control lead |
| c d e f | g |
|
|
|
| Sockets or | External sockets or |
| connectors on rear | connectors |
| panel |
|
1 | USB connector | A USB storage device |
|
| or iPod/iPhone |
2 | Purple strip | OE remote control |
|
| module |
3 | FM/MW radio | FM/MW radio |
| antenna socket | antenna |
4DAB radio receiver DAB radio receiver socket
5 | REAR R | Rear right speaker |
6 | REAR L | Rear left speaker |
7 | For ISO male | ISO male connectors |
| connectors |
|
EN 7