Philips OR2200 Listen to DAB radio stations, Switch to DAB mode, For the first time use

Page 13

7Listen to DAB radio stations

Note

•• For optimal reception, fully extend the antenna and adjust its position.

•• You can program a maximum of 20 DAB radio stations.

•• Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area.

Switch to DAB mode

Press SOURCE repeatedly until [DAB Mode] is displayed.

»»DAB is highlighted.

For the first time use

1

Press SOURCE repeatedly to switch the

2

product to DAB mode.

Press

 

/

 

repeatedly until the [Full

 

 

 

 

3

scan] menu is displayed.

Press

 

 

 

to activate the automatic

search.

»»This product automatically stores radio stations with sufficient signal strength.

»»After the search is complete, the first stored radio station is broadcast automatically.

4 Press /repeatedly to select a station, and then press PRESET to start listening.

Tip

•• You can re-scan to update the list of stored stations (see 'Re-scan for stations' on page 13).

•• You can tune to a station manually (see 'Tune to a station manually' on page 13).

About special symbols

Some symbol may be displayed before the name of a station.

H:The station is one of your 10 favorite stations.

?:The station is unavailable or inactive.

:The station is a primary station with secondary service.

:The station is a secondary station.

Tune to a stored radio station

1 Press / repeatedly to select a station. 2 Press PRESET to start listening.

Program radio stations

1 Tune to a DAB radio station.

2 Press and hold PRESET to activate the programming.

3 Press / repeatedly to select a preset sequence number.

4 Press PRESET to confirm.

»»The radio station is stored with the selected sequence number.

5 Repeat steps 1-4 to program more radio stations.

To tune to a stored radio station, press PRESET to access the list of stored radio stations, and then press / repeatedly.

EN 11

Image 13
Contents Register your product and get support at Always there to help youPage Contents Risk of overheating SafetyYour clock radio Check and identify the contents of the packageIntroduction Whats in the boxOverview of the product Know about the LCD display Connect power Assemble the AC power adaptorPower on Adjust brightnessTip Set time and dateSet an alarm Use the alarm timerDeactivate a preset alarm Snooze the alarmListen to FM radio stations Switch to FM modeSearch for a radio station automatically Search for a radio station manuallyDisplay RDS information Adjust FM settingsRDS program types Listen to DAB radio stations Switch to DAB modeFor the first time use Tune to a stored radio stationUse DAB menus Display DAB informationRe-scan for stations Tune to a station manuallySystem menus Remove invalid stationsListen to an external device Reset the product Upgrade the softwareUse system menus Check the current software versionAdjust volume Use the sleep timer Use the countdown timer Clock/alarm setting is erased TroubleshootingSet the clock/alarm again General information Product informationTuner SpeakersCare of the environment ComplianceCopyright Environmental informationOR220010UMV2.0