Note
•• If you store a radio station with the sequence number of another one, the earlier one is overwritten.
Display DAB information
The name of current DAB station is displayed. You can also view the other information.
To cycle through available information, press 
repeatedly.
•Dynamic label segment (DLS)
•Signal strength
•Program type (PTY)
•Ensemble name
•Frequency
•Signal error rate
•Bitrate codec
Use DAB menus
1 Press and hold 
to access the DAB menus.
2 Press 
/ 
repeatedly to toggle through the menus.
Re-scan for stations
Full scan is used to perform a wide range search for DAB radio stations.
Press 
to start scanning for available DAB stations.
»»After the scanning is complete, the first stored station is broadcast.
Tune to a station manually
With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature.
1 Press 
to access the station list.
2 Press 
/ 
repeatedly to select a station from 5A to 13F.
3 Press 
to confirm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations.
1 Press 
to access the
2 Press 
/ 
repeatedly to select an option. (The asterisk behind the option indicates the current setting.)
•[DRC off]: No compensation applied.
•[DRC low]: Medium compensation applied.
•[DRC high]: Maximum compensation applied.
3 Press 
to confirm the option.
12EN