Philips OR2200 user manual Safety, Risk of overheating

Page 4

1 Safety

Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply.

Risk of electric shock or fire!

Never remove the casing of the product.

Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact the Consumer Care to have the product checked before use.

Never place the product and accessories near naked flames or other heat sources, including direct sunlight.

Never insert objects into the ventilation slots or other openings on the product.

Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Disconnect the product from the power outlet before lightning storms.

When you disconnect the power cord, hold the plug securely, never the cable.

Risk of short circuit or fire!

Use only power supplies listed in the user manual

Before you connect the product to the power outlet, make sure that the power voltage matches the value printed on the back of the product. Never connect the product to the power outlet if the voltage is different.

Never expose the product to rain, water, sunshine, or excessive heat.

Avoid force coming onto power plugs.

Loose power plugs can cause arcing or fire.

Risk of injury or damage to the product!

This product shall not be exposed to dripping or splashing!

Do not place any sources of danger on this product (e.g. liquid filled objects, lighted candles).

Never place the product or any objects on power cords or on other electrical equipment.

If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.

Risk of overheating!

Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation.

Make sure that curtains or other objects never cover the ventilation slots on the product.

Note

•• The rated power voltage is printed on the back of the product.The model number and serial number are printed on the bottom.

2EN

Image 4
Contents Always there to help you Register your product and get support atPage Contents Safety Risk of overheatingCheck and identify the contents of the package Your clock radioIntroduction Whats in the boxOverview of the product Know about the LCD display Assemble the AC power adaptor Connect powerPower on Adjust brightnessSet time and date TipUse the alarm timer Set an alarmDeactivate a preset alarm Snooze the alarmSwitch to FM mode Listen to FM radio stationsSearch for a radio station automatically Search for a radio station manuallyDisplay RDS information Adjust FM settingsRDS program types Switch to DAB mode Listen to DAB radio stationsFor the first time use Tune to a stored radio stationDisplay DAB information Use DAB menusRe-scan for stations Tune to a station manuallyRemove invalid stations System menusListen to an external device Upgrade the software Reset the productUse system menus Check the current software versionAdjust volume Use the sleep timer Use the countdown timer Clock/alarm setting is erased TroubleshootingSet the clock/alarm again Product information General informationTuner SpeakersCompliance Care of the environmentCopyright Environmental informationOR220010UMV2.0