Philips 241S4L user manual Detach the base stand away from the base column by

2. Setting up the monitor

2.4Remove base stand and base (241S4LC/241S4LY)

Remove the base stand

Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury.

1.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.

2.Detach the base stand away from the base column by:

(1)Use your fingers to loosen the screw located at the bottom of the base.

(2)Gently move up-and-down to release the latch that locks the base and pull the base away from the base column.

Remove the base

Condition:

•For VESA standard mounting applications

1.Extend the monitor base to its maximum height.

2.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.Then lift the monitor stand.

3.While keeping the release button pressed, tilt the base and slide it out.

10