Definitive Technology 800/1000 owner manual Service, ProSub Specifications

Service

Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the

problem and requesting authorization as well as the location of the nearest factory service center. Please note that the address given in this booklet is the address of our offices only. Under no circumstances should loud- speakers be shipped to our offices or returned without contacting us first and obtaining return authorization.

Definitive Technology Offices

11433 Cronridge Drive, Suite K

Owings Mills, Maryland 21117

Phone: 410-363-7148

ProSub Specifications

ProSub 1000

Outer Dimensions:	12" W x 17.9" W x 14.4" H
Frequency Response:	18 Hz – 150 kHz
Driver Complement:	One 10" woofer with polymer cone coupled to
Amplifier:	one 10" infrasonic radiator
	300-Watts RMS
Speaker Level High-Pass Filter:	6 db/octave (80 hz)
Low-Level Low-Pass Filter:	24 db/octave continuously variable
	(40 hz – 150 hz) plus unfiltered LFE direct-
Fuse Size:	coupled input
	3.2 amp 250 volt slow-blow Littlefuse 313
	type for the 110 volt version, and 2 amp 250
	volt slow-blow BEL 5ET type for the 240
	volt version.

ProSub 800

Outer Dimensions:	10.3" W x 15.8" W x 12.9" H
Frequency Response:	20 Hz – 150 kHz
Driver Complement:	One 8" woofer with polymer cone coupled to
Amplifier:	one 8" infrasonic radiator
	300-Watts RMS
Speaker Level High-Pass Filter:	6 db/octave (80 hz)
Low-Level Low-Pass Filter:	24 db/octave continuously variable
	(40 hz – 150 hz) plus unfiltered LFE direct-
Fuse Size:	coupled input
	3.2 amp 250 volt slow-blow Littlefuse 313
	type for the 110 volt version, and 2 amp 250
	volt slow-blow BEL 5ET type for the 240
	volt version.
Specifications subject to change

11