XDVD710 OPERATION
Control Locations - Monitor Closed
1 | 2 | 3 | 4 | 5 |
6
16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 |
1 | Band |
|
|
| 9 | Play/Pause/Scan |
| ||
2 | Auto Store/Preset Scan |
| 10 | Stop |
|
|
| ||
3 | Secondary LCD |
|
| 11 | Chapter/Track Up |
| |||
4 | Display |
|
|
| 12 | Chapter/Track Down |
| ||
5 | Open/Close Monitor |
|
| 13 | Fast Forward |
|
| ||
6 | Eject |
|
|
| 14 | Fast Reverse |
|
| |
7 | Rotary Encoder/Enter |
| 15 | Mute |
|
|
| ||
8 | Mode |
|
|
| 16 | Power/Volume |
| ||
Monitor Notes:
•This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls.
•Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN buttons on the front panel only.
•The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.