XDVD710 OPERATION
General Operation
Power On/Off
Monitor Open/Close
Monitor Angle Position
Press POWER momentarily to turn the unit on, the unit will beep 2 times. Press and hold POWER for more than 2 seconds, unit will beep 1 time, then turn off. Note: EJECT will still function even if POWER is off.
Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep when opening, 3 beeps when closing. Be careful not to not touch the monitor during the open/close sequence.
Notes:
•The unit will stop automatically during open/close if an obstacle is detected. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.
•Audio can be heard while the monitor is closed.
Press ANGLE p to increase the monitor view angle.
Press ANGLE q to decrease the monitor view angle.
Notes:
•Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only.
•The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.
•The last position of the monitor can be saved in memory. The monitor will return to its last position automatically the next time it is opened.
Notes:
•The vehicle must be in park and the parking brake applied to view video on the
•As a safety feature, a blue “CAUTION” screen will show on the display when the vehicle's parking brake is not engaged. DVD, AV1 audio can be heard while the vehicle is in motion.
•The video display of the
See DVD operation on page 32 for more details on how to initialize the
PARKING BRAKE.
15