Dual XDVD8130 owner manual General Operation, Power On/Off Reset Mode Video AUX, Volume

XDVD8130 OPERATION

General Operation

Power On/Off

Reset

Mode

Video (AUX)

Notes

Tilt Control (monitor angle)

Volume

Press PWR or any other button (except EJECT or OPEN) to turn the unit on. Inserting a disc will turn the unit on automatically. Press PWR to turn the unit off.

Press RESET the unit upon initial installation or if abnormal operation occurs.

Refer to page 8 for the reset button location.

Press MODE to select between tuner, DVD player and auxiliary input. Modes of operation are indicated in the display.

Press VID to select between OFF, AV1, AV2 and V3 modes. Modes of operation are indicated in the display.

The auxiliary A/V inputs can be selected from any mode (except DVD mode). This allows video to be displayed while listening to the AM/FM tuner (only when the vehicle is in Park and the parking brake is applied), for instance.

•The vehicle must be in park and the parking brake applied to view video on the in-dash monitor.

•As a safety feature, “Picture Off For Your Safety” will appear on the display for 5 seconds anytime the vehicle's parking brake is not engaged. DVD, AV1 and AV2 audio can be heard while the vehicle is in motion.

•The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area.

The angle of the monitor can be adjusted to provide the best view. To adjust, press TILT for more than 2 seconds.

“Tilt Cont” will momentarily appear in the TFT display. Use the rotary encoder or the VOL   buttons to adjust the angle. If the tilt is not adjusted for 5 seconds, the unit will return to normal operation.

Adjust volume using rotary encoder or the VOL   buttons (00-46).

10