Dual XDVD8130 owner manual Bass Control Factor, Tuner Frequency OSD

XDVD8130 OPERATION

General Operation - Setup Menu

Audio/Video Menu

Beep Confirmation

Rear View Image

TFT Brightness

TFT Contrast

TFT Color

TFT Tint

Note

TFT Screen Saver

Bass Control Center Frequency

Bass Control

Q-Factor

Treble Control Center Frequency

Tuner Frequency OSD

Press MENU/AUD for more than 3 seconds to access the Audio/Video setup menu and adjust the following settings:

Press MENU/AUD until Beep appears. Rotate encoder to turn the confirmation beep on or off.

Press MENU/AUD until Rear View appears. Rotate encoder to select the V3 input to be mirrored (On) or normal (Off).

Press MENU/AUD until Bright appears. Rotate encoder to adjust (01 minimum / 30 maximum).

Press MENU/AUD until Contrast appears. Rotate encoder to adjust (01 minimum / 30 maximum).

Press MENU/AUD until Color appears. Rotate encoder to adjust (01 minimum / 30 maximum).

Press MENU/AUD until Tint appears. Rotate encoder to adjust (01 minimum / 30 maximum).

Color and Tint adjustments only affect AV1 and AV2 auxiliary inputs.

Press MENU/AUD until SCR Saver appears. Rotate encoder to turn the screen saver on or off.

Press MENU/AUD until Bass C-Freq.appears. Rotate encoder to select between 60Hz, 80Hz, 100Hz or 200Hz.

Press MENU/AUD until Bass Q-Factor appears. Rotate encoder to select between 1, 1.25, 1.5 or 2.

Press MENU/AUD until Treble C-Freq.appears. Rotate encoder to select between 10kHz, 12.5kHz, 15kHz or 17.5kHz.

Press MENU/AUD until Freq. OSD appears. Rotate encoder to select turn the frequency OSD on or off.

13